Ultrasonic Solar Birds and Animals Repeller


The solar outdoor pest repeller is effective with the PIR function(Motion sensor), it will sense any movement and activate the system to emit ultrasonic frequencies which are capable of repelling birds, cats, dogs, rats, fox etc. The adjustable frequency allows you to select the animals you want to repel.

5991 in stock


The solar outdoor pest repeller is weatherproof and as such designed for outdoor use.



  • Power Supply: Build-in 3 pieces ‘AA’ Ni-MH Rechargeable Battery
  • Capacity:800 mAh
  • Solar Panel: 6V 50mA
  • Working Current: ≤180 mA
  • Standby Current: <2 mA
  • Operation Duration: 9 – 11 Second
  • Motion Sensor Activation: <15feed 100-degree arc.
  • Ultrasonic Frequency: 15 kHz ~ 25 kHz (Adjustable)
  • Effective Range: 5,000 sq. feet


Ultrasonic Solar Birds and Animals Repeller

                                                                    How to Use:

1) Mount the unit with the 4 screws and anchors(Supplied) on an area with sufficient direct sunlight. For better performance, it is recommended to place the unit at least 3 feet above the ground for optimum range. Make sure that the speaker is facing the area you want to be covered.
2) Turn the frequency dial to the desired animal you want to repel. Different frequencies will repel different animals. Some frequencies will repel more than one animal.
3) Turn the unit ON by pressing the ON/OFF button once. Once pressed, the LED will illuminate red and activate the system and will stop to emit the ultrasonic frequency automatically after 9 – 11 seconds. The unit will be activated again if sense any further intruder movement.

                                                              Recharging The Battery:
If there is no sunshine or it rains continuously for long several days and the capacity of the batteries becomes very low, it is recommended to recharge the unit by using the power cord(Not included). There is a DC jack located at the back of the switch. Pull out the jack cover, insert the plug of the power cord into the DC jack. Plug the other end of the power cord into any standard plug.


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.